Home / M21 series / Convoy M21B MAO 21700 flashlight

Convoy M21B MAO 21700 flashlight

WISHLIST
Quantity
ADD TO CART
BUY IT NOW
Detail
Customer Reviews
About the host, 7mm / 9mm / 10mm means the diameter of the reflector bottom hole.
PARAMETER
Material:  Aluminum Alloy
Driver: 12 groups,  Temperature protection management inside
Low voltage warning:  Yes
Reverse polarity protection:  Yes
Lens type:  ar-coated glass
Reflector: orange peel for XHP70.3 HI / XHP50.3 HI  / B35AM / GT FC40 / 519A / SFT70
                  smooth for SST40 / SFT40 / KW CULPM1.TG
Driver output: 6V 5A for XHP70.3 HI , SFT70
                         6V 3A for XHP50.3 HI
                         3V 6A for SST40 / 519A
                         3V 8A for SFT40 / KW CULPM1.TG
                         6V 2.4A for B35AM
                         12V 2.5A for GT FC40
Mode memory: Yes
Tailstand:  Yes
Battery included:  No
Required battery type: standard 21700 lithium battery
Required battery quantity: 1pcs
Diameter(Head/Body):  35.7 / 27.1  mm
Length:  141.5mm
Weight: 120g
 
Driver (12groups):
biggest advantage is that no frequency can be seen in any mode, and there is temperature management.
It can control the flashlight temperature not to exceed 55 degrees Celsius,
If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat.
 
12 groups:
1.click the switch to turn the flashlight on/off,tap the switch to select mode
2.if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.)
   Option 1 (normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.
       -------------sub-option 1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
       -------------sub-option 1.2 (normal-flash 2 times) : tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%)
       -------------sub-option 1.3 (normal-flash 3 times) : tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%)
       -------------sub-option 1.4 (normal-flash 4 times) : tap the switch to select mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS)
       -------------sub-option 1.5 (normal-flash 5 times) : tap the switch to select mode group 5 (1%, 20%, 100%)
       -------------sub-option 1.6 (normal-flash 6 times) : tap the switch to select mode group 6 (100%, 20%, 1%)
       -------------sub-option 1.7 (normal-flash 7 times) : tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
       -------------sub-option 1.8 (normal-flash 8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)
       -------------sub-option 1.9 (normal-flash 9 times) : tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%)
       -------------sub-option 1.10 (normal-flash 10 times) : tap the switch to select mode group 10 (1%, 10%, 35%, 100%)
       -------------sub-option 1.11 (normal-flash 11 times) : tap the switch to select mode group 11 (100%, 20%, strobe)
       -------------sub-option 1.12 (normal-flash 12 times) : tap the switch to select mode group 12(100% only)
   Option 2 (normal-flash 2 times + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode. 
 
battery-check  instructions:
 <2.95V    1 flash,
2.95-3.25V  2 flashes,
3.25-3.55V  3 flashes,
3.55-3.85V  4 flashes,
>3.85V     5 flashes