Flashlight
LED
Driver
Battery
Charger
Accessory
Attachment
Other
Convoy 4X18A orange 18650 flashlight
-
Detail
Basic introduction Construction Material: Aluminium alloy body, The surface is treated by anodic oxidation. Lens type: Ar-coated glass lens Reflector: made of aluminium alloy, the reflective surface is vacuum-coated. orange peel for XHP70.3 HI , GT FC40 smooth for XHP70.3 HI , SBT90.2 LED MCPCB: made of copper.
DTP thermally conductive structure.
3.0 W/(m·K) thermal grease below the MCPCB.Head structure: integrated type (Best structure for conducting heat, but please note that fast heat transfer does not mean fast heat dissipation, which depends on the surface area of the flashlight.) Switch: The electronic switch is located on the side of the head, pay attention to the flashlight using the electronic switch has standby current, if it is possible that you will not use the flashlight for more than a week, please loosen the tail of the flashlight to avoid the risk of battery damage. Tail: nickel-plated phosphor copper spring inside, it can bear 10A current. Electro&optical parameters Driver output: 6V 8A boost for XHP70.3 HI 12V 4A boost for GT FC40 3V 18A linear for SBT90.2 Driver efficiency: 90-95% Charging: 5V 3A Type-C port Mode: XHP70.3 HI : click --> ON / OFF, press and hold ---> 5%-30%-100%, double click ---> strobe GT FC40 : click --> ON / OFF, press and hold ---> 5%-30%-100% SBT90.2 : See below for details Flux: ? Illumination distance: ? (ANSI standard) Runtime: ? Related features Low voltage warning: Yes Reverse polarity protection: Yes Reverse charging function No Mode memory: Yes Temperature control function： Yes , As the temperature rises, the current will drop slowly, but this does not mean that the surface of the flashlight will not heat up.When the flashlight works for a long time under the maximum brightness, the surface temperature will rise to 80-90 degrees Celsius, please be careful of burns. Tailstand: Yes About the battery Battery included: No Required battery type: INR or IMR 18650 lithium cell or battery Required battery quantity 4 pieces Size & weight Length: 153mm Diameter: head 69mm , body 50mm Weight: Net weight 425g
Gross weight 490g (include package)Accessory: 1* flat-to-top battery adapter Mode operation instructions(SBT90.2):
1.click the button ——> flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down
2.flashlight off, press the button ——> moonlight mode 0.2% [This brightness will not be remembered]
3.flashlight on or off, 2-click the button ——> turbo 100%，Double-click again to return to the previously set brightness.
4.flashlight off,3-click the button ——> strobe
5.flashlight off,4-click the button ——> tactical mode, only 100% ,4-click the button again to quit tactical mode.
6.flashlight off,5-click the button ——> voltage detection (* means "flash" , *** pause ******* means 3.7V, )
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1%-10%-40%-100%
8.flashlight off,10-click the button ——> Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.
The flashlight has low voltage protection and temperature control protection.
-
Customer Reviews
Tom*******ula
a few photos of how it throws at 100, 200 and 300 meters. (orange peel reflector, xhp70.3 Hi, 6500K)
Tom*******ula
Very nice color, immediately catches the eye, I saw this flashlight for the first time on YouTube from one user and I couldn't take my eyes off it. The flashlight is very efficient, you can use 4 cells of 3500 mAh and gain 14000 total capacity. For one xhp70.3 hi LED it does not require high-current cells because the cells are connected in parallel and they work the current on 4 cells. On my uni-t multimeter the DC current measurement showed a consumption of around 20 amps, unfortunately my meter has a range of only up to 20 amps so I would have to repeat the measurement with a clamp meter which I do not have. One thing is for sure, the driver powers the LED very effectively because the flashlight burns the skin and it lights up everything in front of me. It charges at 5V / 3 Amps. The end voltage of charging was 4.210 V for the cells. I also measured the amount of LUX from 5 meters and it came out to 6760 lux, so it is 169 kcd, converting to meters it is 822 meters of throw. A very big advantage is the cutout for a lanyard, which is worth installing because the flashlight sometimes tends to fall out of your hand. It's a pity that there is no moon mode, and you can't check the battery voltage and there's no way to block the system before turning it on in a backpack, it has to be unscrewed by a half a turn. This flashlight has a large hotspot and a lot of spill.You can easily illuminate objects 200-400 meters away, they are strongly illuminated. In 100% mode it goes warm after 4 minutes and a bit hot after 5-6 minutes, after 7 minutes i could still hold it with no burnings. The flashlight is large and provides good heat dissipation. I can highly recommend this flashlight with the xhp70.3 Hi emitter for searching, everyday use on a large plot of land, very large capacity of 14,000 mAh for long adventures with lots of lumens.
