Home / Convoy M21K 21700 flashlight

Convoy M21K 21700 flashlight

WISHLIST
Built-in TIR lens with an overall 180-degree beam angle. Offers some throw capability while also providing flood illumination.
Quantity
OUT OF STOCK
  • Detail

    Parameter

    • Material: aluminum alloy
    • Low voltage warning: automatic power off
    • Reverse polarity protection:YES
    • High temperature protection: YES,When the temperature on the drive board reaches 55 degrees Celsius, the current will slowly drop, but the naked eye cannot detect the drop in brightness, which will not cause a psychological gap.
    • Lens Type: 50mm 3degree TIR lens
    • Charging: 2A current
    • Switch position: side button
    • Tail stand: yes
    • Battery included or not: not included
    • Battery type required: 1*21700 battery (can bear 20A current)
    • Luminous flux: maximum 5000-8000LM ,theoretical LED output value, the actual light output is lossy, for reference only
    • Output current: max 20A
    • Head diameter: 55mm
    • Battery tubediameter: 28mm
    • Flashlight length: 141.5mm
    • Product weight: 216g
    • Weight with box: 280g

    Flashlight Operation

    • Press the button → The flashlight turns on at the last memorized brightness → Hold the button to gradually increase brightness → Release, then hold the button again to gradually decrease brightness
    • When the flashlight is off, press and hold the button → Moonlight mode (this brightness level can not be memorized)
    • Whether the flashlight is on or off, double-click the button → 10A brightness mode
    • Whether the flashlight is on or off, double-click and hold the button → 20A brightness mode (after releasing the button, it returns to the previous brightness level or turns off)
    • When the flashlight is off, triple-click the button → Strobe mode
    • When the flashlight is off, quadruple-click the button → Tactical mode, 20A; quadruple-click again to exit Tactical mode
    • When the flashlight is off, quintuple-click the button → Voltage check (“” indicates flashes, “** pause *******” indicates a voltage of 3.7V)
    • When the flashlight is off, six-click the button → Switch to stepped brightness mode: four brightness levels, maximum current 10A
    • When the flashlight is off, ten-click the button → Lockout mode; under any operation the flashlight will blink once to indicate it is locked. Ten-click again to exit Lockout mode. Note: This is the only way to unlock.
    • The flashlight features low-voltage protection and temperature control protection.

  • Customer Reviews
    No comments