Home / Convoy M21K tan 21700 flashlight
  • Convoy M21K tan 21700 flashlight
  • Convoy M21K tan 21700 flashlight

Convoy M21K tan 21700 flashlight

(5.0)
WISHLIST
Built-in TIR lens with an overall 180-degree beam angle. Offers some throw capability while also providing flood illumination.
TIR type:
10deg bead - NV1010
3deg flat - other LED type
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Parameter

    • Material: aluminum alloy
    • Low voltage warning: automatic power off
    • Reverse polarity protection:YES
    • High temperature protection: YES,When the temperature on the drive board reaches 55 degrees Celsius, the current will slowly drop, but the naked eye cannot detect the drop in brightness, which will not cause a psychological gap.
    • Lens Type: 50mm 3degree TIR lens
    • Charging: 2A current
    • Switch position: side button
    • Tail stand: yes
    • Battery included or not: not included
    • Battery type required: 1*21700 battery (can bear 20A current)
    • Luminous flux: maximum 5000-8000LM ,theoretical LED output value, the actual light output is lossy, for reference only
    • Output current: max 20A
    • Head diameter: 55mm
    • Battery tubediameter: 28mm
    • Flashlight length: 141.5mm
    • Product weight: 216g
    • Weight with box: 280g

    Flashlight Operation

    • Press the button → The flashlight turns on at the last memorized brightness → Hold the button to gradually increase brightness → Release, then hold the button again to gradually decrease brightness
    • When the flashlight is off, press and hold the button → Moonlight mode (this brightness level can not be memorized)
    • Whether the flashlight is on or off, double-click the button → 10A brightness mode
    • Whether the flashlight is on or off, double-click and hold the button → 20A brightness mode (after releasing the button, it returns to the previous brightness level or turns off)
    • When the flashlight is off, triple-click the button → Strobe mode
    • When the flashlight is off, quadruple-click the button → Tactical mode, 20A; quadruple-click again to exit Tactical mode
    • When the flashlight is off, quintuple-click the button → Voltage check (“” indicates flashes, “** pause *******” indicates a voltage of 3.7V)
    • When the flashlight is off, six-click the button → Switch to stepped brightness mode: four brightness levels, maximum current 10A
    • When the flashlight is off, ten-click the button → Lockout mode; under any operation the flashlight will blink once to indicate it is locked. Ten-click again to exit Lockout mode. Note: This is the only way to unlock.
    • The flashlight features low-voltage protection and temperature control protection.

  • Customer Reviews
    5.0

    Reviews (2)

    5
    2
    4
    0
    3
    0
    2
    0
    1
    0
    M***ey

    I got the tan M21K with 5000K R9080 NV1010. I'm very pleased with my purchase! The beam is flawless, with a fairly abrupt transition from spill to hotspot, and very close to a 20° beam angle. This emitter under this TIR is just a slight touch rosy, nothing extreme, and not green at any level including Moon. Speaking of Moon, it's a very nice low level, which the 20 A driver is already known for. The ramping interface is the same as well, with the one second delay, which doesn't really bother me much. Happily, I noticed with this light, and confirmed it on my M21D as well, that the 20 A driver allows returning to the previous memorized level with a single (or double) click after accessing turbo via the double click! Another click shuts the light off. This is a wonderful improvement which partially fixes my UI complaints from the past. Now, as long as I leave the light at a useful level, I can access Turbo whenever I want without having to slowly ramp back down again! Just avoid accessing Turbo by ramping, or at least don't leave it there. My one gripe is the remaining issue with the UI, the lack of shortcut from Moon to the main ramping sequence. At the same time the lowest ramped level is too bright. Honestly, Moon mode could just be combined into the regular ramping. Other than that, this is a great light! At work, a family was taking pictures in front of our company Christmas display. There wasn't a lot of front light, so I asked if they wanted more light. My M21K lit the scene beautifully and effortlessly without breaking a sweat, didn't even get warm! A testament to the great efficacy this LED has, even in R9080, as well as the sizable thermal mass.

    Da****ra

    Will there be more TIRs to chose from?

BACK