Convoy S21E purple 21700 flashlight
-
Detail
Basic introduction Construction Material: Aluminum alloy,The surface is hard anodic oxidized Lens type: gree-coated glass lens Reflector: made of aluminium alloy, the reflective surface is vacuum-coated. orange peel for 519A , XHP50.3 HI , B35AM , 719A ,LHP531 smooth for SST40 , SFT40,SFT-42R,F45R LED MCPCB: made of copper.
DTP thermally conductive structure.
3.0 W/(m·K) thermal grease below the MCPCB.Head structure: integrated type (Best structure for conducting heat, but please note that fast heat transfer does not mean fast heat dissipation, which depends on the surface area of the flashlight.) Switch: The electronic switch is located on the side of the head, pay attention to the flashlight using the electronic switch has standby current, if it is possible that you will not use the flashlight for more than a week, please loosen the tail of the flashlight to avoid the risk of battery damage. Tail: There is a hole at the bottom for installing the lanyard .It does not affect the handstand of the flashlight. Nickel-plated phosphor copper spring inside. Electro&optical parameters Driver output:
(default constant current driver)3V 6A for SST40 , SFT40 , 519A , 3V XHP50.3 HI 6V 2.2A for B35AM , 719A 6V 3A for XHP50.3 HI Driver output:
(Anduril 1.0 FET)3V 8A for SST40 , SFT40, 3V XHP50.3 HI 3V 6A for 519A Driver efficiency: 80%-95% Mode: See below for details Flux: 1500-2000LM Illumination distance: < 100 meters (estimated by the naked eye, data for reference) ? (ANSI standard) Runtime: ? Related features Low voltage warning: Yes, After a period of alarm, the flashlight will automatically turn off. Reverse polarity protection: Yes Mode memory: Yes Temperature control function: Yes , As the temperature rises, the current will drop slowly, but this does not mean that the surface of the flashlight will not heat up. Tailstand: Yes About the battery Battery included: No Required battery type: unprotected 21700 lithium battery Required battery quantity 1 piece Size & weight Length: 116.4mm Diameter: 27.3mm Weight: net weight 88g (without packaging, batteries, headlight strap
gross weight 98g (include clip, lanyard, package)Accessory: 1* lanyard , 1* clip Flashlight Mode Operation Instructions
Default Constant Current Driver
-
Turn on and adjust brightness: Click once to turn on the flashlight at the last remembered brightness. While it is on, press and hold to ramp the brightness up. Release, then press and hold again to ramp it down.
-
Moonlight: From off, press and hold to enter moonlight mode (0.01 A, 0.2%). This brightness is not remembered.
-
Turbo: From on or off, double-click for 100% brightness.
-
Strobe: From off, triple-click to enter strobe mode.
-
Tactical mode: From off, click four times to enter tactical mode, which operates at 100% brightness only. Click four times again to exit.
-
Voltage detection: From off, click five times. The flashes indicate battery voltage: three flashes, a pause, then seven flashes mean 3.7 V.
-
Four-level mode: From off, click six times to switch from smooth ramping to four brightness levels: 1%, 10%, 40%, and 100%.
-
Lock mode: From off, click ten times to lock the flashlight. While locked, any operation produces one flash. Click ten times again to unlock it; this is the only way to unlock.
The flashlight includes low-voltage protection and temperature control.
10A Buck Constant Current Driver
-
Turn on and adjust brightness: Click once to turn on the flashlight at the last remembered brightness. While it is on, press and hold to ramp the brightness up. Release, then press and hold again to ramp it down.
-
Moonlight: From off, press and hold to enter moonlight mode (5 mA). This brightness is not remembered.
-
High: From on or off, double-click for 100% brightness at 5 A.
-
Momentary turbo: From on or off, double-click and hold the second click for 10 A turbo. Release to return to the previous brightness or the off state.
-
Strobe: From off, triple-click to enter strobe at 100% brightness.
-
Tactical mode: From off, click four times to enter tactical mode at 5 A. Click four times again to exit.
-
Voltage detection: From off, click five times. Three flashes, a pause, then seven flashes mean 3.7 V.
-
Four-level mode: From off, click six times to switch from smooth ramping to four output levels: 145 mA, 500 mA, 1,500 mA, and 5,000 mA.
-
Lock mode: From off, click ten times to lock the flashlight. While locked, any operation produces one flash. Click ten times again to unlock it; this is the only way to unlock.
The flashlight includes low-voltage protection and temperature control. Standby current is approximately 22 µA when powered off.
Mode operation instructions(Anduril 1.0):
Mode operation instructions(Anduril 1.0):

-
-
Customer Reviews5.0
Reviews (7)
70000
Sam*******frey
It's a pretty hefty light. Didn't realize it'd be this heavy; however this not bad thing. I love how bright it is, it's very targeted spotlight with some spill. This is my first convoy but definitely not my last!
F***o
I bought this S21E to walk the dog in the dark. I bought it with SFT-70 LED, 5000k and Vapcell F63 6250mAh Battery. It Works very good. Enjoy the pictures.
Mar******láž
I bought the purple S21E for my wife, but I also like using it. It has a high-quality finish, attractive controls (Anduril) and excellent afterglow thanks to the SFT40 LED. This is the second S21E at home (in addition to other Convoy models) and certainly not the last. I highly recommend it.
M***sh
Received my first Convoy within 10days to india, Super happy it is very beautiful
J***o
TL;DR good little sub-100m thrower, B35AM 5K has excellent colour rendering and decent lumen output, runs cool with low power draw. Preface: I use my lights (mostly) for ecology work, so high CRI is a priority over raw light output. Downsides are a bright moonlight mode and logarithmic brightness increase (it increases in apparent brightness rapidly off 0%, then appears to increase slower above 10%), but those are only minor faults that don't detract from the rest of the package. I got this for somebody else since it's beginner friendly (USB-C charging, mode selection is simple) but ended up liking it so much that I kept it. This is optioned with a B35AM, not the most powerful of LEDs, but it throws decently for its size. Its real trick, however, is the colour rendering: I've used many other lights over the last few years, and the B35AM in 5000K has one of the cleanest colour spectrums I've seen in a light. Deep reds render nicely, and all other colours seem rather neutral and clear - it's my go-to light for night ecology work. See the 3rd pic for a comparison with my other warmer light; it's got a nice tint, but the colours are less accurate - in spite of being another high CRI emitter. It has a balanced hotspot that works well to provide usable light out to 100m (it throws further, but not usefully so for me), making it very handy to light up subjects in a tree, down pathways, etc. Spill from the hotspot is handy up close. Thermal management is pretty good with the boost-driven B35AM; it'll hold turbo for quite a while before getting too hot to use on warm Australian nights (I've gone minutes easily on colder nights), and maintains an excellent run time with its modest current draw. Even an older Samsung 40T provides a good runtime with it, the lower power draw means you can get away with a good energy cell (BAK 65E, SA112, etc), although I opted for a tabless power cell (RS50 in my case) as I share cells with other lights.
Vladi***********bakov
Отличный фонарь с заливным светом! Диод 519А, температура 4000к. Отличный вариант на ближних дистанциях, с хорошей емкостью аккумулятора 21700. Очень удобная и мягкая кнопка управления. Фиолетовый цвет просто шикарный! Родной безель гладкий. Тот что на фото, установлен отдельно. Спасибо Саймон!!!
Sa*****din
Good
Flashlight
LED
Driver
Battery
Charger
Accessory
Attachment
Other