Samsung INR21700-50S 21700 lithium battery
-
Detail
Samsung INR21700-50S DATASHEET PDF FILE
Nominal specifications (*1)Item
Specification
3.1 Standard discharge capacity
Typ. 5,000mAh
-Charge: 0.5C(2.5A), 4.20V, 0.05C(250mA) cut-off @ RT
-Discharge: 0.2C(1A), 2.5V cut-off @ RT
*1C=5.000mA
3.2 Rated discharge capacity
Min. 4,800mAh
-Charge:1.2C(6A), 4.20V, 0.02C(100mA)cut-off @RT
-Discharge: 10A, 2.5V cut-off @ RT
3.3 Nominal voltage
3.6V
3.4 Standard charge
CCCV, 2.5A, 4.20 V, 250mA cut-off
3.5 Rated charge
CCCV, 6A, 4.20 V, 100mA cut-off
3.6 Charging time
Standard charge : 150min / 250mA cut-off(@ RT) Rated charge: 100min / 100mA cut-off(@ RT)
3.7 Max. continuous discharge (Surface temperature)
25A(Without temperature cut) 45A(With 80℃ temperature cut)
3.8 Max. charge current
10A (for step charge) 6A (continuous charge)
3.9 Discharge cut-off voltage
2.5V (End of discharge)
3.10 Cycle life
① Capacity ≥ 2,940mAh @ after 250cycles (60% of the standard capacity @ RT)
-
Charge : 6A, 4.20V, CCCV 100mA cut-off @ RT
-
Discharge: 25A , 2.5V cut-off @ RT
-
Charge : 6A, 4.20V, CCCV 100mA cut-off @ RT
-
Discharge: 45A, 2.5V cut-off
② Capacity ≥ 2,940mAh @ after 100cycles (60% of the standard capacity @ RT)
(80℃ cut-off, re-discharge release < 50℃) @ RT
3.11 Retention characteristics
Capacity recovery(after the storage) ≥ 4,320 mAh (90% of the rated capacity @ RT)
-
Charge : 6A, 4.20V, CCCV 100mA cut-off @ RT
-
Storage : 30 days (@ 60℃)
-
Discharge : 10A , 2.5V cut-off @ RT
3.12 Cell weight
72.0g max
3.13 Cell dimension
Height : Max 70.62mm Diameter : Max 21.25mm
3.14 Operating temperature (Ambient)
Charge : 0 to 60℃ Discharge: -20 to 60℃
3.15 Operating temperature(*2) (Surface)
Charge : 0 to 60℃
(recommended recharge release < 45℃)
Discharge: -20 to 80℃
(must re-discharge release < 60℃)
3.16 Operating temperature (For safety certificate)
Charge : -10 to 60℃
3.17 Recovery 90% after storage(*3)
1 year 0~25℃
3 months 0~45℃
1 month 0~60℃
Note (*¹): Protection function of the battery pack should be set within the specified charge, discharge and temperature range in Cell Specification.
Note (*2): Discharge OTP(over temp. protection) should not be over 80℃ of temperature.
Protection set should be based on the location of the cell surface with the highest temp increase part of the battery pack.
Note (*3): If Cell is kept as ex-factory status (30% of charge),
the capacity recovery rate shall be more than 90%.
-
-
Customer ReviewsNo comments